Mercedes Sprinter W901/902/903/904/905 1995–2006 Headlight eyelids (black, ABS, 2000-2006)

Description

Headlight eyelids for Mercedes Sprinter model years 2000–2006 (body types W901–W905) — a pair of black ABS plastic trims that are glued above the front headlights to make the front end look more expressive. “Choose color” parameter — “Matte black” (part number rm228): 2 trims with a matte texture, manufacturer Digital Designs.

What the “Matte black” parameter means

The parameter defines the color and surface texture of the trims. “Matte black” — black eyelids with a matte textured surface, ready for installation: no painting is required, they match the black plastic of the grille, bumper, and mirrors. The set includes 2 trims, left and right, i.e., one pair for both headlights. The eyelids are a decorative part: they change the look of the front end, making the headlight “look” more stern, without affecting the optics themselves.

Which Sprinter these eyelids fit

This listing is intended for the first-generation Sprinter model years 2000–2006 — body types W901, W902, W903, W904, and W905 with any wheelbase and roof height, because the headlights are the same. What to check before ordering:

• Vehicle before 2000. The model page covers 1995–2006, but the eyelids are specified specifically for 2000–2006. If your Sprinter is older, compare the shape of your headlights with the product photos.
• Model year 2006 — transitional. In this year, both the old body W901–W905 and the new W906 (it’s called the “dolphin”) were produced. These eyelids do not fit the W906 — it has completely different headlights.
• Replaced headlights. If the vehicle has aftermarket/tuning headlights, eyelids made for the OE shape may not sit accurately.

If in doubt, send the manager a photo of the front end — they will verify the headlights.

How the eyelids are glued on

The installation type per the listing is glass adhesive/sealant. Only the trims are included, so the adhesive is purchased separately. Steps:

1. test-fit the trims on dry headlights and mark the position;
2. clean and degrease the bonding area on the headlight and on the trim itself;
3. apply the adhesive/sealant in a strip along the inner edge of the trim;
4. press the trim on, secure it with masking tape, and do not wash the vehicle until the adhesive sets.

Apply the adhesive so that it doesn’t squeeze out to the outside — after drying, excess is harder to remove.

What to pair with

For the same body, there is the EuroCap hood deflector 2000–2006 and the winter grille cover. If there is already a matte deflector on the hood, matte eyelids look in the same style with it. Other eyelids for this body — on the page headlight eyelids for Sprinter W901–W905, the rest of the tuning — in the Mercedes Sprinter 1995–2006 section.

The description was prepared with the help of AI based on an analysis of over 1 million phone calls between DD Tuning managers and customers and the company’s knowledge base. We collected the questions customers ask most often and the answers proven in practice.