Door Sill Protectors — Page 96

Door sill scuff plates are protective and decorative trims that are stuck onto the door opening sill: vehicle-specific stainless-steel sets (Carmos, OmsaLine, Libao), universal Flexill aluminum-and-plastic sets (4 pcs: front 45 × 5 cm, rear 23 × 5 cm), black ABS plastic sets (EuroCap, DDU, DPT), and illuminated options. Most are mounted with self-adhesive tape without drilling; the size and number of pieces per kit are listed in each product’s specifications.

Types of door sill scuff plates

Vehicle-specific or universal scuff plates — which to choose?

A vehicle-specific plate is made to match the sill shape of a particular car, so it covers the needed area and doesn’t overlap the door seal. Select the make and model in the “Марка і модель” filter and check the model years in the title: after a generation change, the sill is usually different. A universal plate has fixed dimensions, so before ordering measure the length and width of the flat part of the sill: a flat trim may not sit properly over raised edges and ribs.

Among stainless-steel options, there are two Turkish manufacturers: OmsaLine use Italian stainless steel and typically offer more precise fitment geometry. Carmos provide several designs for the same model — marked V1, V2, V3 in the name. Libao is stainless steel as well, including LED-backlit versions.

Outer sill, inner sill, and trunk sill — what’s the difference?

• Door sill scuff plates are stuck onto the metal sill you see when the door is open.
• Inner sill trims are installed on the plastic sill section inside the cabin near your feet; for example, Citroen Berlingo 2008–2018 has 3-piece and 4-piece options.
• Rear sill protector is the top part of the rear bumper / trunk loading sill, not the door sill.

Other chrome interior details are in chrome interior trims, and exterior chrome parts are in chrome trims. If you need a step for an SUV, see side steps — a scuff plate won’t replace them.

How to stick a door sill plate correctly

1. Test-fit the plate dry and make sure it doesn’t interfere with closing the door.
2. Clean the sill, degrease, and dry it; WD-40 is not suitable for degreasing.
3. Apply in warm conditions: on cold, wet, or dirty surfaces the tape holds worse.
4. Peel off the backing film and press the plate firmly along its entire length.

The plate protects paint from scratches but won’t fix rotten metal: remove corrosion before installation. We ship orders with Nova Poshta, and you can install the parts at DD Tuning’s network of certified service centers — your manager will suggest the nearest one.

This description was prepared with the help of AI based on analysis of over 1 million phone calls between DD Tuning managers and customers, plus the company knowledge base. We collected the most frequent customer questions and practical, field-tested answers.