Frequently Asked Questions About Roof Bars and Roof Racks
Usually no: roof rails run along the roof, while load crossbars are selected separately according to the type of rails. Exceptions are rails with crosspieces for Toyota Hilux and Nissan Navara, and a set of integrated roof rails with crossbars for Land Cruiser Prado 150. See the product specifications for what’s included.
Yes. If the roof has factory mounting points, a rack for штатні місця (V3 series) will fit. If the roof is smooth, there are crossbars whose feet clamp into the door openings — Erkul Asaf V4 and Niken Oluksuz V4.
For crossbars on roof rails, in factory mounting points, and on a smooth roof — no. Drilling or adhesive sealant may be needed for longitudinal roof rails if there are no factory mounting points on the roof; the installation method is specified in each product’s specifications.
Follow the lowest limit across the whole system: the car roof, roof rails, crossbars, and mounts. Add the weight of the box or basket to the load, and distribute the cargo evenly.
These are crossbars with a lock in the mounts: they are harder to remove without a key. The lock does not increase load capacity, and crossbars without a key are just as securely fixed mechanically.
Only if the roof type, width, and mounting method match. Crossbars for roof rails will not fit a smooth roof, and model-specific feet for factory mounting points are designed for a specific model and years — choose via the “Make / Model” filter.
How to Choose and Install Roof Bars
Identify the roof type Check what is on the roof: raised rails, flush rails, factory mounting points under caps or moldings, or a bare roof. This determines which crossbar system to choose.
Choose the car model in the filter Select the make, model, and production years in the “Make / Model” filter — the list will show only crossbars and rails matched to your body type. For vans, choose the base separately.
Check the dimensions and kit For a bare roof and universal profiles, measure the width above the front and rear doors. Check the kit contents and mounting method in the specifications.
Test-fit the supports Place the supports on the mounting points without tightening the bolts: make sure the crossbars sit level, centered, and that the doors and sunroof open freely.
Tighten the fasteners Tighten the supports alternately on both sides, without excessive force, according to the product instructions. Protect the paint and seals where the supports touch the body.
Check after the first kilometers After the first trip, check the tightening again. Distribute the load evenly and do not exceed the system’s minimum load limit.
Pros and cons
Extra luggage space: a box, basket, bicycle, skis or a ladder go on the roof, not in the cabin.
There are systems for any roof — for standard and integrated rails, factory mounting points and smooth roofs.
Vehicle-specific crossbars mount without drilling the roof.
The crossbars are easy to remove when not needed; lockable versions protect against quick removal.
With cargo on the roof, noise and fuel consumption increase.
The vehicle’s height increases — keep in mind the garage, parking and low entrances.
Load capacity is limited by the lowest limit of the roof, rails and mounts.
Crossbars are selected for a specific roof type and model — ones from another vehicle won’t fit without modification.