Toyota Corolla E150 accessories 2007–2013 — Page 31

For the Toyota Corolla 10th generation (E150 body, sedan 2007–2013), DD Tuning has collected model-specific accessories: Meliset body kit for painting (front and rear bumper lips, side skirts, spoiler), rear window visors, door wind deflectors and hood deflectors, stainless-steel chrome trim, EVA mats, rubber and polyurethane mats, mud flaps, cross bars for a smooth roof, and halogen fog lights for the 2010–2013 facelift. Some parts differ between the pre-facelift 2007–2010 and the facelift 2010–2013—this is stated in the product title.

How to make sure you have a Corolla E150 and not a neighboring generation

2007 and 2013 are transition years: in those years, both the previous and the next generation were produced. So before ordering a bumper, fog lights, mud flaps, or wind deflectors, verify the body by comparing photos of the front end. The hatchback of this generation was sold as Toyota Auris, and Corolla Verso is a separate model; both have their own sections on the website, and sedan parts do not carry over.

Which body kit and rear window visor are available for Corolla 150

In the body kits section, there’s a set from the Turkish manufacturer Meliset: front bumper lip, rear bumper lip, side skirts, and spoiler—all ready for painting to match the body color. Parts are sold separately, so you can build the kit step by step. For the rear window there are three visors: EuroCap made of ABS plastic (black), Libao V2 fiberglass for painting, and the black fiberglass 1234 Upgrade. The visors are installed with windshield adhesive/sealant.

Which wind deflectors, hood deflectors, and chrome trims fit

• Door wind deflectors (set of 4) on double-sided tape: Sunplex Sport (polystyrene), HIC and Niken with a chrome molding (polycarbonate). They stick on the outside to a cleaned and degreased frame.
• Hood deflectors EuroCap and HIC made of polycarbonate—supplied with a mounting kit.
• Stainless-steel chrome trims: upper window surround (4 pcs), outer window surround and door-handle covers (choose OmsaLine in Italian stainless steel or Carmos), door-sill plates OmsaLine (2 pcs) and Carmos (4 pcs), a trim above the license plate for the 2010–2013 facelift, plus ABS turn-signal repeater grilles—“Oval” 94 × 50 mm and “Rectangle” 115 × 50 mm. Flexill sill plates made of aluminum and plastic—Sport or Exclusive lettering.

Chrome trims and wind deflectors are applied over the factory parts and do not replace seals or moldings. For the grille, there is a model-specific Toyota emblem 14 × 9.5 cm with four clips.

Which floor mats to choose for Toyota Corolla 2007–2013

• EVA Digital Designs—black, gray, or brown; the EVA trunk mat is a separate item.
• Rubber mats Stingray Premium, Polytep and Niken 3D, plus Stingray 3D polyurethane mats—each as a 4-piece cabin set.

What else is available for the E150 sedan

Mud flaps Premium made of rubber-plastic (4 pcs, factory mounting points); cross bars for a smooth roof—Asaf V4 aluminum (bar length 135 cm, for roofs up to 135 cm wide) and Oluksuz V4, both with a mounting kit, since the sedan has no roof rails; halogen fog lights Libao for the 2010–2013 facelift with plastic bezels; for the interior—silicone dashboard covers Meric.

This description was prepared with the help of AI based on the analysis of over 1 million phone calls between DD Tuning managers and customers, as well as the company knowledge base. We gathered the questions customers ask most often and practical, field-tested answers.