Toyota Land Cruiser Prado 120 2002-2009 Rear right cover for roof rails

Description

The rear right cap for roof rails is a black elongated cover that closes the rear support (end) of the factory roof rail on the right side of the roof of the Toyota Land Cruiser Prado 120 2002–2009. Manufacturer Cixtai, material ABS plastic, installs onto the rail, 1 piece in the set, part number 120-PRD-2RR. This is not a tailgate (rear door) cover, but a small part on the roof that customers also call a “rear cap”, “plug”, or “rear roof-rail plastic piece”.

How to tell that you need the rear right one

There are four caps on the factory Prado 120 roof rails, and each has its own shape: the rear one covers the support near the rear edge of the roof, the front one covers the support above the windshield. The side is determined by the direction of travel: right is the passenger side on left-hand-drive vehicles. If you’re not sure which cap came off, look at which side and at which end of the rail the support is open.

All four are Cixtai, black ABS, 1 piece each. The rear left and rear right cannot be swapped: they are mirrored, not identical.

Will the cap fit your roof rail

• The rails must be factory-style for Prado 120. Caps for Turkish, Chinese, and other non-original rails of different designs usually do not fit factory supports — and vice versa.
• Match the shape with the product photos: the cap is long, with a smooth downward slope toward the roof and a cutout for the rail profile.
• Not sure — send the manager photos of the rail from the side, the open support, and fragments of the old cap if they are still available. The photos show the support shape and clips.
• Parts from Prado 150 or Lexus GX 470 are not a guarantee: rear caps from other models generally do not fit the 120 rail, so it’s better to get the part specifically for Prado 120.

How to install the rear cap

The cap slips onto the support and is secured with clips, with no glue, drilling, or headliner removal. Clean the support from dirt and remnants of the old cap, align the cutout with the rail profile, and press until it clicks. If the part does not seat without force, check the side: the rear right will not fit on the left support.

One cap or a pair

This item is sold individually, so you can replace only the missing right one. The new cap is glossy, while the factory one may have become matte over the years from the sun, so for a uniform look the rear caps are often replaced as a pair — together with the rear left. More about the front cap on the same side — on the page for the front right Prado 120 roof-rail cap.

If it’s not the cap that is damaged but the rail itself or its foot, take a look at the original-design roof rails, Turkish black and chrome, as well as the entire section of components for Prado 120 roof rails. Crossbars and roof racks are in the roof racks and rails section; other accessories are on the Toyota Land Cruiser Prado 120 2002–2009 page.

Description prepared with the help of AI based on analysis of over 1 million phone calls between DD Tuning managers and customers and the company knowledge base. We collected the questions customers ask most often and answers proven in practice.