Ford Connect 2014-2021 Tuning — Page 35

ULTIMATE SOUND ABSORBER 15 PRO is a high-performance sound-absorbing material based on special polyurethane foams. Its unique cell structure ensures excellent noise reduction across a wide frequency range. The reinforced adhesive layer allows easy installation on metal and plastic surfaces, while the pyramid surface enhances sound absorption. Perfect for achieving superior acoustic results in car audio installations.

MADELIN - sealant based on black non-woven fabric. It has high mechanical wear resistance. It is used in places where plastic parts adjoin the body and each other. Treatment areas: gaps between decorative elements of the interior and the car body, gaps in instrument panels, sealing air ducts to eliminate creaks.

U-POWER OVERTON 7NET is a noise-absorbing and sealing material with a reinforced adhesive layer based on special polyurethane foams, so even at its thickness of 7 mm it competes with analogues twice as thick! The reinforced adhesive layer allows the material to be mounted on metal and plastic surfaces without stretching or deformation. U-POWER OVERTON 7NET is used to achieve the maximum high sound quality result when installing acoustics. 10 times more effective than standard foam rubbers (sound absorption coefficient up to 95%). The material has the ability to slowly recover after compression (memory effect), does not emit odors and does not stain adjacent surfaces. Absorbs moisture less than 30% by mass and dries quickly.

Sound-absorbing material made of special polyurethane foam with a pyramidal surface that enhances noise absorption and diffusion across 250–5000 Hz. Ideal for car roofs, door panels, interior trim, home theaters, and recording studios. Up to ten times more effective than standard foams (sound absorption up to 95%). Odorless, non-staining, low moisture absorption, and quick-drying.

Ultimate Antiscreep is a sealing material in the form of tapes made of synthetic fabric of the «velor» type with an adhesive layer. It is used in places where plastic parts join the body and between themselves. Finishing areas: gaps between decorative elements of the interior and car body, gaps in instrument panels, sealing of air ducts to eliminate squeaks.