Universal Front Lip Spoiler DPT Black V-2 (ABS, Gloss Black)

Description

The universal front lip spoiler DPT Black V-2 is a 182 cm long lip in three pieces, made of ABS plastic with a black gloss finish (manufacturer DPT, Turkey), which is glued with windshield adhesive/sealant under the lower edge of the front bumper. It is not tied to a specific make or body: it is chosen by the bumper’s dimensions and shape, and then trimmed and fitted to the specific car.

The lip (also called a lip or splitter) is glued under the lower edge of the bumper, making the front of the car look lower and sportier.

Dimensions and how to choose a lip for your bumper

The product card states: length 182 cm, width 15 / 70 cm, height 5 / 10 cm. The add-on consists of three parts, so it’s easier to fit to the bumper’s curve. Since the part is universal, matching in length alone does not guarantee an even fit — before ordering, check a few things:

• measure the lower edge of the bumper along the entire arc, from corner to corner, not in a straight line;
• see how rounded the corners are: on a heavily rounded bumper, fitting takes more time;
• keep in mind that the lip lowers the front and reduces ground clearance — important for low cars and high curbs;
• assess the relief of the lower surface: for the adhesive to hold, the lip needs a flat contact area.

If the bumper is shorter, the lip is trimmed to its width. You can’t extend a lip that’s too short, so if you’re in doubt, choose one with extra length.

Installation

Installation type — with windshield adhesive/sealant; adhesive is not included, the комплект matches the photo. First, the part is test-fitted dry, marked, and trimmed if needed, then the surface is degreased and glued, securing it until fully cured. The ready black gloss finish allows installing the lip without painting. You can have the add-on installed at the network of certified DD Tuning service centers — the manager will tell you the nearest one.

How V-2 differs from other universal DPT lips

DPT has several universal front lips, and they differ in shape and dimensions according to the product cards:

• DPT Black V-2 combined black gloss with gray — length 180 cm, width 10 / 60 cm, height 2 / 9 cm;
• DPT Blue V-2 — another V-2 version;
• DPT White V-1 and DPT Blue V-1 — the longest, 192 cm;
• DPT Red — 170 cm, for narrower bumpers;
• DPT V-1 and DPT V-2 made as a single piece — 180 cm each, differ in width at the ends;
• DPT V-1 flap add-ons — a pair of corner elements, 45 cm each, not a one-piece lip.

All models of the brand are collected on the DPT page.

Universal vs. vehicle-specific lip

A vehicle-specific lip is made for a specific body and bumper, so it follows its shape. A universal one is selected by dimensions, and it almost always requires fitting — but it works where there is no vehicle-specific add-on. If a vehicle-specific lip exists for your car, first look at front bumper lip spoilers with make and model selection; all universal options are in the universal lip spoilers section. To complete the look with a diffuser and side skirts, check body kit sets.

The description was prepared with the help of AI based on an analysis of over 1 million phone conversations between DD Tuning managers and customers, as well as the company’s knowledge base. We collected the questions customers ask most often and answers that have been verified in practice.