Universal Front Lip Spoiler DPT V-4 (ABS, Gloss Black)

Description

Universal front lip spoiler DPT V-4 — a lower add-on for the front bumper made of ABS plastic in gloss black, consisting of three parts: a 120 cm center strip and two 55 cm side pieces with vertical fins at the ends. It is not tied to a specific make or model: it fits a bumper whose contour and width match the dimensions of the parts, and it is mounted using windshield adhesive sealant.

What are the dimensions of the DPT V-4 lip?

• center part — length 120 cm, width 13 cm, thickness 1 cm;
• side parts (2 pcs.) — length 55 cm, width tapers from 17 to 8 cm, height increases from 1 cm to 8 cm on the vertical fin at the edge;
• material — ABS plastic, color gloss black;
• manufacturer — DPT, Turkey;
• package contents — as in the photo: center strip and two side parts, adhesive is not included;
• installation type — windshield adhesive sealant.

The side pieces are bent upward and wrap around the bumper corners, and the fins at their ends give the lip a sporty splitter-style look. The page includes photos of the parts separately, an example on a car, and a video.

Which car will the universal V-4 front lip fit?

There is no vehicle fitment list for this product, so selection is not by make and year but by bumper shape. Before ordering, measure the bottom of your bumper: the length of the straight section in the center (for the 120 cm strip), the width of the lower ledge, and the curvature of the corners where the side pieces sit. The same length still doesn’t guarantee fitment — the profile matters too. If you’re unsure, send the manager front and side photos of the bumper with measurements: they will tell you whether the lip will fit and whether trimming will be needed.

How is the V-4 different from other universal DPT lips?

If the bumper is short in the center or has pronounced corners, the V-4 is more convenient: the separate side parts are easier to fit to the curve. For a long, straight lower bumper edge, it’s worth comparing it with V-1 and V-2. All models from the manufacturer are collected in the section universal DPT lip spoilers.

What to consider before installation?

A universal part is sometimes slightly trimmed, heated, and bent to match the bumper curve — this is a normal part of installation. Therefore, first test-fit all three parts without adhesive: the center should sit evenly, and the side pieces should follow the corners. Then degrease the plastic, apply windshield adhesive sealant, and secure the lip for the drying time according to the adhesive instructions. The lip is decorative and does not protect the bumper from impact, and the lower strip reduces front ground clearance — keep this in mind on high curbs and ramps. You can have the lip installed within the network of certified DD Tuning service centers — the manager will point you to the nearest one.

Other universal front lips — in the section front bumper lip spoilers, other body kits without model-specific fitment — in the section universal plastic body kits.

The description was prepared with the help of AI based on analysis of over 1 million phone calls between DD Tuning managers and customers and the company knowledge base. We compiled the questions customers ask most often and answers verified in practice.