For the first-generation Volkswagen Amarok (2010–2022), this page brings together model-specific upgrades: Dakar heavy-duty body kit, fender flares, 7 canopies, tonneau covers, bull bars, side steps, roof rails, floor mats, and chrome. Most parts fit the 2010–2022 body; the Vegas front double bar and grille trims have separate versions for the pre-facelift 2010–2016 and the 2016 facelift.
Which Amarok tuning parts depend on the model year
| Product | Years as listed on the product page | What to consider |
|---|
| Vegas front double bar (stainless steel or black) | 2010–2016 | stainless steel: tube d70/42 or d76/42 mm; black: 76/42 mm |
| Vegas front double bar (stainless steel or black) | 2016–2021 | separate version for the facelift front end; stainless steel: d76/42 or d70/42 mm |
| Grille trims (wide or narrow strips, 4 pcs.) | 2010–2016 | not compatible with the 2016+ facelift |
| Fog light trims (2 pcs.) | 2010–2012 | only for early vehicles |
| Dakar body kit, canopies, fender flares, side steps, roof rails | 2010–2022 | one product fits the entire body range |
For the second-generation Amarok there is a separate page: Volkswagen Amarok 2022+ tuning. Parts for 2010–2022 do not carry over.
Heavy-duty kit for Amarok: what’s in the Dakar range
Dakar heavy-duty kit is black metal (Omsa Line, Turkey) with installation in factory mounting points. The range includes a Dakar front bumper, a rear bumper in two designs (V1 and V2; they differ only in appearance), a separate tow hitch for the rear bumper, and a trim piece that covers the joint between the bumper and the fender flare. Dakar heavy-duty side steps also come in V1 and V2; each version is available with or without LED lighting. The kit includes 2 steps and a mounting set.
Fender flares (bushwackers): ABS or fiberglass
In the fender flares section you’ll find four vehicle-specific kits: EuroCap in black ABS plastic (standard and “bolt-on” look), black ABS by GBT, and fiberglass Meliset flares ready for painting. They are installed with automotive glass adhesive/sealant; adhesive is not included. Fiberglass sets are chosen by fuel filler door size—19 or 23 cm—so measure the flap before ordering. For EuroCap and the fiberglass kit, the product pages specify an over-arch protrusion of 8–9 cm.
Canopy, bed cover, or roller shutter: how to cover the bed
In the Amarok canopy section there are six plastic Omsa Line canopies (Grand Box, Full Box, Starbox, Panelvan, Canopy, and Canopy with windows) plus the Omcap metal canopy—each installs in factory mounting points. There is also a 3-piece ABS bed cover and Omback roller shutters, as well as a roll box (aluminum + plastic). In the bed roll bars section you’ll find a stainless roll bar (60, 70, or 76 mm tube), a black version (60 or 76 mm), and Dakar roll bars with or without LED, with a basket or a separate 100×100 cm basket. If your bed has roller shutters installed, choose a roll bar “for roller shutters”.
Bull bar or front bar for Amarok
Bull bars WT002, WT003, WT004, and VL001 are made of stainless steel (CAN, Turkey) and are available in polished finish and black Black. In the front protection range you’ll find ST008, ST014 (tube d60/42 or d60/60), ST015, ST017, ST018-2, F3-08.7, and the Vegas double bars (see table). Vehicle-specific protection includes a mounting kit and installs in factory mounting points without modifications. At the rear: rear protection bars by Omsa (stainless 70 or 76 mm or black), corner bars AK003 and AK003-Double, and protection bar AK005-2.
Side steps, roof rails, floor mats, and chrome
- Side steps: aluminum platforms by Erkul (Allmond, Duru, Maya, Maydos, Tayga, RedLine, and more), Amazon, stainless Premium, and side tubes. Vehicle-specific kits install in factory mounting points; the set includes 2 steps and mounting hardware.
- Roof rails: Skyport (gray or black) and OmsaLine Sport install in factory mounting points with a mounting kit; Shark rails with crossbars are bonded with automotive glass adhesive/sealant. For the bed, there is a rack for factory mounting points and a version for canopy mounting points.
- EVA floor mats: a 5-piece set in black, gray, beige, brown, or blue; there are also Stingray and Carsuit rubber mats.
- Deflectors: window visors for 4 doors (Sunplex, HIC, Niken), EuroCap and EuroCap Dragon hood deflectors, HIC hood deflectors, and windshield visors with LED.
- Chrome trims by Carmos and OmsaLine for handles, mirrors, pillars, sills, and rear bumper are applied with double-sided tape after degreasing.
This description was prepared with AI based on the analysis of over 1 million phone calls between DD Tuning managers and customers, as well as the company’s knowledge base. We collected the most frequently asked questions and provided answers proven in practice.
.jpg)
