VW Golf Mk2 Tuning 1983–1992 — Page 2

For Volkswagen Golf 2 (Mk2, 1983–1992, 3- and 5-door hatchback), DD Tuning offers model-matched ABS or stainless fender flares, chrome door sill covers, side indicator grilles, a front emblem and Volkswagen lettering, dashboard trim covers, a leather gear knob, and vehicle-specific cabin mats — EVA, textile, and rubber. There are no model-specific bumpers or body kits for Golf 2 in the catalog; the rest of the products on the page are universal and selected by size.

What’s made specifically for Golf 2

How to choose trims for a 3- or 5-door Golf 2

• Fenders. The flares are sold as a set of four — there’s no separate front or rear pair. Before ordering, compare A–D dimensions with the product card and tell the manager how many doors your car has: sometimes the edge is adjusted during installation.
• Sills. The kit includes four covers — two longer front ones (45 cm) and two shorter rear ones (23 cm), intended for the four door openings of a 5-door body. On a 3-door Golf 2 the doors are longer, so measure your sill before buying.
• Side indicators. The grilles are universal: choose by the shape of the factory indicator on the fender and double-check the size — 94×50 mm for oval, 115×50 mm for rectangular.

What floor mats are available for Golf 2

All floor mats for Golf 2 are vehicle-specific, made by Digital Designs, and fit the factory locations in the cabin:

• EVA — six colors: black, beige, blue, brown, gray, orange. The cells trap water, snow, and sand, and the mat is easy to wash. All colors are listed in EVA mats for Golf 2.
• Textile — three ranges: Classic, Premium, and Deluxe; Deluxe can be made in black, beige, brown, blue, gray, purple, or red.
• Carsuit rubber mats — black, beige, gray, or brown, for those who often drive in mud and snow.

How accessories are installed on Golf 2

Most parts are installed with adhesive: door sill covers, indicator grilles, the lettering, and dashboard trims have an adhesive backing. Before installation, the surface is washed and degreased, then the trim is pressed firmly along its full length. Fender flares are mounted with windscreen adhesive or double-sided tape — the product card includes videos for both methods: adhesive holds stronger, while tape is easier to remove. The front emblem clips into place, and the gear knob installs in the factory position on the shifter. Other badges and lettering are in emblems and lettering for Golf 2, and knobs are in gear knobs.

This description was prepared with the help of AI based on the analysis of over 1 million phone calls between DD Tuning managers and customers, plus the company knowledge base. We collected the questions customers ask most often and provided answers verified in real use.