Mercedes Sprinter W901/902/903/904/905 1995–2006 Wheel center cap (chrome, 1 pc)

Description

Wheel center cap (chrome, 1 pc) — this is the central cap for the wheel rim Mercedes Sprinter W901/902/903/904/905 1995–2006 from Davs Auto (Turkey): ABS plastic with a chrome-plated coating, installs in the factory location of the rim without glue. Sold individually — you need four caps for four wheels. According to the manager’s reply in the comments under the product card, the part diameter is 10 cm.

How to check that the cap will fit your rim

Wheel diameter or car brand doesn’t determine anything here: the cap is held by clips on the edge of the hole in the center of the rim, so you compare that fitment.

• Remove the old cap and measure the outer diameter (for this part according to the manager — 10 cm) and the mounting diameter near the clips — a caliper is convenient.
• Compare the clips and the depth. Even with the same diameter, a different shape of retainers or a deeper “cup” will prevent the cap from snapping in.
• Look at the back side in the product card photos and compare it with your old part; if you don’t have the old one — take a photo of the hole in the rim and send it to the manager.

How this item differs from other caps in the catalog

In the section for this body there are several different items, and they are not interchangeable:

Full list — on the page caps for Sprinter W901–905 rims.

Is chrome metal?

No. The cap base is ABS plastic; the chrome is a coating on top. For a part that sits near the road and is pressure-washed, this is a standard design: plastic doesn’t rust, and the coating doesn’t require care other than washing without abrasives and aggressive chemicals. The main color in the product card specs is listed as gray — that’s the color of the plastic base, while the front surface is chrome-plated.

How to replace the cap

1. Pry off the old cap along the edge with a plastic trim tool or a screwdriver through a rag so you don’t scratch the rim.
2. Clean the mounting seat from dirt and remnants of old clips.
3. Place the new cap with the clips into the hole and press evenly with your palm until it clicks. No drilling, gluing, or heating is needed.
4. Make sure the cap sits without play; if it rotates or pops out — the fitment isn’t yours, don’t force it.

What else there is for Sprinter 1995–2006 in the badges section

For the same body, the catalog also has the front emblem 18 cm in an OEM style and the Sprinter lettering; all badges and lettering are collected on the page Sprinter W901–905 badges, and the rest of the body accessories — on the page Mercedes Sprinter W901/902/903/904/905 1995–2006.

Description prepared with the help of AI based on analysis of over 1 million phone calls between DD Tuning managers and customers and the company knowledge base. We collected the questions customers ask most often and answers proven in practice.