The windshield washer does not work: we are looking for the cause and solution

A clean windshield is the key to safe driving. When the washer stops working, it is not just an inconvenience, but a serious problem, especially in bad weather. But do not panic right away. Often the cause can be found and eliminated on your own. You can also improve your car and modernize it using tuning accessories, a wide range of which is available in our product catalog.

Step-by-step problem diagnosis

1. Check the fluid level: The easiest and most obvious. It could be that the washer reservoir is simply empty. Make sure you have added enough good quality washer fluid for the season (non-freezing in the winter).
2. Check the fuse: The washer system is protected by a fuse. Locate the fuse box (usually under the hood or in the passenger compartment), identify the correct one using the diagram in the car manual, and check its condition. A blown fuse should be replaced with a similar one.
3. Listen to the motor: When trying to turn on the washer, listen to see if the washer motor is making a characteristic sound. If there is no sound, the problem may be with the motor itself, its wiring, or its power supply (again, the fuse).
4. Inspect the hoses and nozzles: If the motor is running but no fluid is coming out, the hoses may be clogged or kinked, or the hood washer nozzles themselves may be clogged. Try gently cleaning the nozzles with a thin needle.

If these simple steps don't help, it's likely that the motor itself is faulty or there's a break in the wiring. In this case, it's best to contact a car service center.

Timely resolution of the washer problem will ensure good visibility and safety on the road.