Universal Front Lip Niken Black (ABS)

Description

Niken Black — a universal front lip (lip, splitter) made of black ABS plastic, 169 cm long, which is glued with windshield adhesive-sealant under the lower edge of the front bumper; it is not tied to a specific brand and is selected by the bumper’s dimensions and shape, manufacturer per the product card — DPT (Turkey). It differs from other Niken lips only by the color of the lower insert — in Black everything is black, and for a wider bumper there is the longer DPT Black V-2 at 182 cm.

What is the lip made of and what are its dimensions?

The lip is sectional. In the product photo you can see two side parts that wrap around the bumper corners, a central part, and a lower insert. In the Black version, all elements, including the insert, are black. Dimensions per the product card:

• length — 169 cm;
• width — 47 cm;
• height — 4 cm;
• length of the lower (colored) insert — 74.5 cm.

Thanks to the sections, the lip is easier to fit to the bumper’s curve than a one-piece strip, and if the bumper is narrower — it is trimmed to the width of your car.

How do you choose a lip for your bumper?

In the product card the lip is marked as limited universal: it fits many bumpers, but not any bumper, and usually requires minor fitting. To make sure the size fits exactly, before ordering:

• measure the lower edge of the bumper along the arc from corner to corner, not in a straight line, and compare with the 169 cm length;
• look at the shape of the corners: the side sections have a bend, so on a very rounded or, наоборот, very flat bumper, test-fit them especially carefully;
• check whether there is a flat surface underneath for the adhesive to bond to well;
• keep in mind that the lip lowers the bottom of the bumper and reduces the distance to the road — this is important for low cars, high curbs, and steep driveways.

A longer lip can be trimmed, but you can’t extend a too-short one. If your bumper is wider, take a look at the longer universal lip DPT Black V-2 with a length of 182 cm.

How to install the Niken Black lip?

The installation type per the product card is windshield adhesive-sealant, so prepare it in advance along with a degreaser. The usual order is: dry test-fit, marking and trimming the sections if needed, degreasing the surface, gluing and fixing until the adhesive is fully cured. Don’t rush the test-fit — it determines how evenly the joints between the sections will line up. You can install the lip at the network of certified DD Tuning service centers — the manager will suggest the nearest one.

What other colors are there, and how is a vehicle-specific lip different?

The same lip with identical dimensions is available with a colored lower insert: Niken Red, Niken Blue, Niken Grey, Niken White and Niken Yellow. Black is the most understated, fully black option without a contrasting accent.

A vehicle-specific lip is made for a particular body, so it follows the bumper’s shape and fits with minimal adjustment. If there is one for your car, first check front bumper lip spoilers with brand and model selection. The universal Niken Black is chosen when there is no vehicle-specific lip for the body or when you like this particular design; all universal options are collected in the universal lip spoilers section.

Description prepared with the help of AI based on analysis of over 1 million phone conversations between DD Tuning managers and customers and the company knowledge base. We collected the questions customers ask most often and answers proven in practice.