Mercedes Sprinter W906 2006–2018 Stick-on Wind Deflectors (2 pcs, HIC)

Description

Adhesive HIC wind deflectors for Mercedes Sprinter W906 2006–2018 — a set of two polycarbonate deflectors for the front door windows. Mounted with the included double-sided adhesive tape; there is no need to insert them into the groove under the seal.

Which Sprinter W906 the HIC wind deflectors fit

The set is selected for Sprinter W906 2006–2018: both before the 2013 facelift and after it. There are two transition years in which it’s better to check against the photos. In 2006, both the old body 901–905 and the new W906 (“dolphin”) could be produced — these wind deflectors are intended only for W906. At the end of production, in 2018, the next generation W907 is already alongside it: its parts are not automatically considered compatible. If you’re not sure which body you have, send the manager a photo of the front doors.

What’s included and what the wind deflectors are made of

• manufacturer — HIC, Taiwan;
• material — polycarbonate, color black;
• installation type — adhesive;
• package contents — 2 window deflectors and double-sided adhesive tape.

The photos on the page show that the deflector is tinted: it is semi-transparent, does not block visibility, and runs along the upper edge of the window. Evaluate the tint level based on these photos. The set is sold as a pair — one wind deflector for each front door, driver and passenger. The page includes a set of two, not a single wind deflector.

Adhesive or in-channel wind deflectors on a Sprinter: what’s the difference

For W906, the catalog includes wind deflectors of two types. Adhesive ones attach to the door or the outer frame, do not touch the glass, and do not go into the window regulator channel. In-channel ones are inserted under the seal and, depending on the product, may load the window regulator or interfere with the window closing — this must be checked after test fitting. The main options for Sprinter W906 are compared below.

How to stick wind deflectors on a Sprinter

Adhesive wind deflectors are installed on the door or frame area specified by the manufacturer. Before installation, the product is test-fitted without removing the protective film from the tape, the position relative to the mirror is checked, and then the surface is thoroughly cleaned and degreased, because bonding strength depends on it. Scratches or dullness on the transport film are not a product defect: inspect the deflector after removing it. Wind deflectors can be installed at the network of certified DD Tuning service centers — the manager will suggest the nearest one. We ship orders via Nova Poshta.

Other wind deflectors, visors, and hood deflectors for this vehicle — in the section Mercedes Sprinter W906 window deflectors; the full catalog for this model — on the page Mercedes Sprinter W906 2006–2018.

Description prepared with the help of AI based on analysis of over 1 million phone calls between DD Tuning managers and customers, as well as the company knowledge base. We collected the questions customers ask most often and answers verified in practice.