Mercedes Sprinter W906 2006–2018 Winter grille cover (2006-2013)

Description

Winter cover for the radiator grille for Mercedes-Benz Sprinter W906 2006–2013 (pre-facelift) — a matte ABS plastic panel that mounts externally over the factory grille on hooks, without drilling. It does not fit the facelift W906 2013–2018: separate V1 or V2 covers are required there.

In winter it partially blocks the flow of cold air to the radiator, so the engine reaches operating temperature faster at idle, in the city, and on short trips. The cover is solid, with a raised star in the center, and completely closes the grille between the headlights. Manufacturer — Digital Designs, color — black. In conversation it is also called a “winter blanking plate”, “winter cover”, or “winter grille”.

What material is the cover made of?

The cover is matte, made of ABS plastic with a slightly rough textured surface. Minor scratches from a brush, snow, and sand are hardly noticeable on it, so for a working van that’s on the road every day, this is a practical option. The part number and specifications are shown on the product page.

How to tell the 2006–2013 front end from the 2013–2018 facelift?

In 2013 the Sprinter W906 received a facelift: the grille, headlights, and hood shape changed, so covers before and after the update are not interchangeable. This one is for the pre-facelift front end 2006–2013, including 2013 vehicles that still came off the line with the old front end. In the transition year, go by the headlights and grille rather than the date in the registration documents: compare them with the photos on the listing, and if the front end was ever replaced — send a photo to the manager.

For the facelift W906 there are two separate covers: winter cover V1 (2013↗) — a smooth panel with a cutout around the factory emblem, and winter cover V2 (2013↗) — embossed, repeating the horizontal slats of the factory grille. All options for this body are collected on the Sprinter W906 winter covers page. For older Sprinter 1995–2006 (bodies W901–W905) a different part is needed — winter cover for the grille Sprinter W901–W905.

How to install the cover on a Sprinter W906?

There’s no need to remove the factory grille or drill anything. The kit includes the cover and fasteners; the mounting type is hooks: they are screwed to the cover through the provided holes, then hooked onto the ribs of the factory grille. Before installation, clean the grille from dirt, snow, and ice, test-fit the cover along the contour, and only then tighten the fasteners. If there is a camera, sensor, or other additional equipment in the grille or behind it, make sure the cover does not block it.

When to install and when to remove the cover?

The cover is installed when stable cold weather sets in and removed in spring as temperatures rise. During winter, monitor engine temperature: if under load — a fully loaded van, a long climb, a long highway run — the gauge rises above the usual, the cover should be removed. If your vehicle’s owner’s manual has restrictions on covering the radiator grille — follow them.

How to choose a cover for other generations of the “Sprinter” and Vito is explained in the article winter cover for Mercedes Sprinter and Vito: how to choose, and general tips are collected in the material what to cover a car’s radiator grille with. Covers for other models of the brand are in the Mercedes-Benz winter covers section and in the general winter covers catalog. To the cover for the pre-facelift W906 you can add the EuroCap hood deflector 2006–2013.

The description was prepared with the help of AI based on the analysis of more than 1 million phone conversations between DD Tuning managers and customers, as well as the company’s knowledge base. We collected the questions customers ask most often and answers verified in practice.

Keep your car warm this winter with our unique cover!

Winter is not only a time of joy and holidays but also a challenge for your vehicle. Did you know that proper engine cooling can significantly improve its performance during the cold season? That’s where our winter car cover becomes your indispensable assistant!

Why is it important?

Our research has shown that at -5°C, a car engine without a winter cover heated up only to 67°C. This is not enough for optimal performance and can lead to excessive fuel consumption. But with our cover, the temperature stabilizes at an ideal 90°C!

What do you get?

1. Efficient cooling: Quickly reaches optimal operating temperature.
2. Fuel savings: Lower fuel costs thanks to improved engine efficiency.
3. Ease of use: Simple installation with no special tools required.

Make the right choice for your car!

Don’t let winter affect your car’s performance. Our winter cover is an easy and affordable way to ensure reliable operation in cold weather. Invest in comfort and efficiency today!