Mitsubishi Shogun / Pajero III Accessories — Page 26

For Mitsubishi Pajero Wagon III model years 1999–2006 (V60/V70 body), DD Tuning has put together vehicle-specific products made for the third generation: CAN stainless steel bull bars, front guards and rear bars, over 20 Erkul aluminum side steps, roof rails and crossbars, window visors and hood deflectors, EVA mats, plus rubber and textile mats for the cabin and trunk. All model-specific items are designed to fit the full production period 1999–2006.

How not to confuse Pajero III with IV and Pajero Sport

Body parts are not interchangeable between generations: even bull bars that look similar for III and IV use different mounting points. Pajero Sport is a separate model on a different platform, so Pajero Wagon parts won’t fit it. Before ordering, confirm the generation using your vehicle documents and also check the number of doors: Pajero III was produced in a short 3-door and a long 5-door body.

Which bull bar and side steps to choose for Pajero III

In the “Bull bars and side steps” section you’ll find the largest selection of model-specific products for this generation. CAN items are made from stainless steel, install into factory mounting points, and come with a fitting kit; most models are available in standard polished finish and in black (Black):

• bull bars QT006 (Ø60 mm tube), QT007, WT003 Black, WT004, plus front guards ST008, ST014, ST015;
• rear bars AK002 and AK003;
• side steps by Erkul in aluminum — Allmond, Fullmond, Maya (including Blue and Red color options), Tayga, Bosphorus, New Vision, Maydos, RedLine, Mevsim, Shining, Duru, Sunrise, Rainbow, Line, X5-type; and CAN stainless steel side tubes designed “for the OEM” step.

Side steps are sold as a pair (2 pcs) with a fitting kit; mounting brackets for Erkul side steps are also available separately. Models differ in design and the color of the stepping pad. “For the OEM” side tubes are installed next to the factory step, not instead of it.

Which roof rails and roof rack fit

In the “Roof racks/Roof bars” section there are Turkish-design roof rails (2 pcs) in chrome and black finishes made from aluminum and plastic. They are mounted with windshield adhesive/sealant; the fitting kit is included, the adhesive is purchased separately. The length matches the factory rails on the long 5-door body; for the short 3-door body the profile is trimmed to length. The rails can take Erkul crossbars Skybar V1, Wizard V1 and WingCarrier V1 (the last two are lockable), Erkul crossbars lockable or non-lockable, CAN V1 non-lockable, as well as the Omsa Line roof basket with crossbars and a 100×120 cm net.

What’s available for the Pajero III interior and body

• Window visors HIC made of polycarbonate (4 pcs, double-sided tape) and Niken Luxury with a chrome molding (4 pcs) — a set for the four side doors of the 5-door body; hood deflectors EuroCap and HIC.
• Floor mats: in-house EVA by Digital Designs (4 cabin mats; black, gray, beige, blue, brick), plus separate EVA trunk mats in five colors; rubber Stingray Premium and Polytep (4 pcs each) and Carsuit in four colors with a trunk mat; textile Classic and Premium.
• Chrome trims: Flexill door sill plates (4 pcs, front 45×5 cm, rear 23×5 cm, with Sport or Exclusive lettering) and Carmos ABS-plastic repeater grilles — oval or rectangular.
• For the interior — Meric self-adhesive dashboard trims in wood, aluminum, carbon, or titanium finish.

EVA mats don’t have tall raised edges: water and dirt are held in the cells, and rinsing with water is enough to clean them. Visors and trims are applied to a clean, degreased surface.

This description was prepared with the help of AI based on the analysis of over 1 million phone calls between DD Tuning managers and customers, plus the company knowledge base. We collected the questions customers ask most often and provided answers verified in practice.