Rear Diffusers DDCarbon — Page 13

A diffuser is the lower part of the bumper; it shapes the rear end and often frames the exhaust. A protective trim piece is mounted on top, in the loading area, and protects the paint from scratches. These parts are not interchangeable.

Check the model, body type, and years against the product name, then the bumper version: M-Sport, AMG-Line, S-Line, or base. A part made for an original bumper will not necessarily fit a replica, so if in doubt, send the rear photo to our manager.

For diffusers “with tips” — yes, this is shown in the “Included” field. For the rest, tips are bought separately in the exhaust tip section. Decorative pipes are not connected to the exhaust.

Parts marked “for painting” and fiberglass trims are painted after test fitting. Diffusers in gloss black or made of natural carbon are installed without painting.

It depends on the product: into factory mounting points, with double-sided adhesive, or with glass adhesive sealant. The method is specified in the “Installation type” field in the product specifications.

Not guaranteed. Measure the width and curve of the lower part of the bumper, compare it with the dimensions in the product card, and test fit the part before installation — sometimes adjustment is needed.

Yes, the section includes tow hitches for the Dakar bumper from Omsa Line — including for Mitsubishi L200 2006–2015, Nissan Navara 2015, and Toyota Hilux 2006–2015. Choose the one made for your pickup and model years.