Ford Focus MK2 front lip and splitter (2005–2008)

For the pre-facelift Ford Focus MK2 (2005–2008) there are two model-specific front lips by Meliset – one for the hatchback (part 2607-510) and one for the saloon (2607-510A) – both in fibreglass, supplied unpainted and bonded with glass adhesive sealant. The rest of the page is universal ABS lips. A lip fits under the standard front bumper; it is not a bumper assembly, and we do not stock complete front bumpers for the Focus MK2. If your car is the 2008–2011 facelift, see the Focus MK2 2008–2011 page.

Hatchback, saloon or estate – which lip

The part numbers differ, so check your body style first. Fibreglass is trial-fitted, adjusted if needed and primed before painting in the body colour.

Universal lips

• DPT – V-1 to V-8 in gloss black ABS, several with a red, blue, white, yellow or grey insert, plus paired Flap corner pieces; the DPT V-1 is 180 cm long, 10 cm wide in the centre and 5 cm at the ends, and comes in three sections.
• Niken – six colours; Niken Black is 169 cm with a 74.5 cm coloured insert.
• Digital Designs V-1, V-4, V-5, V-6 and OmsaLine – black ABS.

Pick a universal lip by the width and curve of your bumper's lower edge and trial-fit it dry before bonding – a lip that is too short cannot be extended, and any lip reduces ground clearance on kerbs.

Complete the kit

Meliset also makes rear bumper lips, side skirts and a spoiler for the Focus MK2 2005–2008, all ready to paint. Everything for the model is under Ford Focus II 2005–2008. Delivery to the UK.

This description was prepared with the help of AI based on an analysis of more than 1 million phone conversations between DD Tuning staff and customers, and on the company's knowledge base. We collected the questions customers ask most often and answers proven in practice.