Audi Q2 2016- Integrated roof rails black OEM (Aluminum, adhesive mounting)

How it works

Prepare the roof surface

Clean the installation areas on Audi Q2 2016- models from dust, dirt, and moisture. For self-adhesive mounting, the surface must be dry and even.

Test-fit the roof rails

Before applying, place the integrated black OEM roof rails on the roof to check their position. This will help align the elements correctly before securing them.

Remove the protective layer

Carefully peel off the protective backing of the self-adhesive layer. Do not touch the adhesive surface with your hands so as not to reduce adhesion.

Install the roof rails in place

Place the roof rails on the prepared section of the roof and press along their entire length. Secure the elements with even pressure.

Check the fastening

After installation, make sure the roof rails are held firmly along their entire length. If necessary, press again on the areas where the contact with the surface is weaker.