How to install the cilia on the headlights

How to stick the lashes? I believe that the answer to this question is simple and obvious. Then ask him for your woman and You will understand the complexity and diversity of this process. And not because women are more verbose, but because it is able to capture many of the subtleties, specific features and nuances that we men often overlook. And even though the cilia the cilia strife, however we will try to understand the nature and order of installation of deflectors headlight.

On the Internet you can find a lot of recommendations for the preparation of the cilia with their own hands from fiberglass and epoxy resin, where everything is simple and elementary, and the result is achieved by itself. We would not advise the General mass of motorists to engage in "crafts", preferring to purchase ready-made products in specialized outlets. Therefore try to briefly describe the features of the installation of deflectors for the headlights on the lighting means of transportation for motorists with little experience and little engineering knowledge. Those who are capable of making lashes out of scrap materials, our advice is simply not needed.

Fasten the deflector on the surface of the headlamp in two ways: with tape and sealant. Many professionals have resorted to a combination of these means of obtaining the inextricable connections. It is necessary with great care and thoroughness approach to the choice of mounting material. Only the highest quality of them can provide a sufficient degree of contact and holding power.

The installation process itself is carried out in 3 stages. The first is the preparation of the working surface by cleaning and degreasing, pre-fitting and marking control points. The second phase depending on the applied material is performed in two steps. In the case of double-sided adhesive tape of the final installs on the surface of the lights at the indicated labels and by her gently attached our accessory. For the case of using the sealant it is applied on a given surface and is marked by the lighting element and the contact surface for the eyelash. And only after this is their "docking". The third, final, stage is required in the matter of minutes necessary to keep the installed parts with a certain effort. First trip after the installation of the deflectors headlight delay at night for maximum "setting" of the connection.

If You got the cilia are not fully compliant with the contours of the appliances of electric lighting, or You want to make the original shape of this device, you should perform the work in such sequence. First and foremost is the markup in place, and on the baffle. Then caused to the circuit is cut using a special cutting tool or grinder. Please note that the cut should be carried out with the external side of the marker line. The resulting cut strip with abrasive means with finishing "nulevkoy". To ensure uniform color, and if you want to experiment with the colour solutions, the item is primed and painted evenly without leaks. Ready cilia mounted on the vehicle in the manner described above.

Unusual and extraordinary, as you can see, the installation of the cilia there. The main thing to do with love and without any stress and You will not have to blush for the result of our efforts.