Mitsubishi Outlander 2021- Integrated roof rails grey OEM (Aluminum, adhesive installation)

How it works

Prepare the roof surface

Before installation, clean the mounting area on the roof of the Mitsubishi Outlander 2021- from dirt, dust, and moisture. This is necessary for reliable contact between the roof rails and the surface.

Test-fit the roof rails

Place the integrated gray OEM roof rails on the roof and check whether they match the Mitsubishi Outlander 2021- model. The set is designed for model-specific installation.

Apply the glass adhesive sealant

Use glass adhesive sealant at the mounting points, as this type of installation is specified for this product. Apply the sealant evenly along the contact points.

Secure the roof rails

Install the roof rails in the prepared area and press them firmly against the surface. Hold the elements in the correct position until the fasteners are secured.

Check the installation

After installation, make sure the roof rails sit evenly and have no play. Allow the adhesive sealant to fully cure before using the roof rack/roof bars.