Range Rover Sport 2014-2022 SVR Facelift Kit for 2021

The 2021 SVR restyling kit converts the pre-facelift Range Rover Sport L494 (model years 2013–2017) to the look of the 2021 Range Rover Sport SVR: both bumpers, fenders, the grille, the front headlights and the rear lights are replaced; door moldings, arch extensions and side vents are added. Compared to the kit in standard configuration, it differs by the SVR bumpers, moldings and arch extensions.

What’s included in the SVR restyling kit?

According to the product card, the set includes 10 items, all in the 2018–2022 design:

• SVR front bumper;
• SVR rear bumper;
• SVR door moldings;
• SVR arch extensions;
• left fender and right fender (1 pc each);
• radiator grille;
• front optics;
• 2018+ rear lights (2 pcs);
• side vents — decorative vent trims.

Manufacturer — GBT (China), installation type — into OEM mounting points. Bumpers, moldings, arch extensions, grille and side vents are made of ABS plastic; the rear lights are made of polycarbonate. Body parts are supplied for painting. The kit is packed into five boxes: the largest is 218 × 80 × 69 cm, total weight is about 110 kg, so plan in advance where you will receive and store the parts before installation.

SVR, Standard or body kit: what fits your L494?

Both restyling kits are collected on the page restyling kits for Range Rover Sport, and the remaining options are in the section body kit sets. The pre-facelift and updated version are easiest to tell apart by the front end, so for selection send the manager a photo of the car from the front: the VIN alone is not always sufficient for this.

Why not install only a bumper or headlights on the pre-facelift?

The 2018–2022 SVR front bumper is designed for the updated body and does not fit separately on 2013–2017 vehicles. The restyling headlights have a different shape, so on the pre-facelift they are installed only together with replacing the front end — bumper, fenders and grille. That’s why all of these parts are included together in the kit. There is no hood in the set: for a complete SVR look, the catalog separately has the SVR hood with a ventilation opening and the front fender liners for SVR.

How to prepare the vehicle and install the kit?

Before ordering, уточніть у менеджера деталі вашого авто:

• model year and photos from the front, rear and side;
• how many parking sensors are in the front bumper (4 or 6), whether there is a camera and headlight washers;
• body paint code — for painting the new parts.

The work sequence is as follows:

1. removal of OEM parts and test-fitting the new ones: the technician checks gaps, symmetry, mounts and cutouts for sensors;
2. preparation and painting to match the body color — the transport primer is not a finish coat;
3. final assembly and wiring of the headlights and rear lights by an auto electrician.

Restyling is full-fledged bodywork. The kit can be installed at the network of certified DD Tuning service centers — the manager will tell you the nearest one.

The description was prepared with the help of AI based on an analysis of more than 1 million phone conversations between DD Tuning managers and customers and the company’s knowledge base. We compiled the questions customers ask most often and practice-verified answers.