What to do if the windshield washer nozzles are clogged?

Clogged washer nozzles are an unpleasant problem that can seriously complicate driving in conditions of poor visibility. But do not despair, you can deal with this problem on your own. In addition, you can significantly transform your car and make it more presentable if you use tuning accessories, a huge assortment of which is available in our online store.

Causes of nozzle clogging

• Low-quality washer fluid: salts, impurities and other contaminants can clog the nozzles.
• Fluid freezing: In winter, ice can block the nozzle openings.
• Mechanical damage: falling of small stones or insects can damage the nozzles.

How to clean the nozzles

• Flushing the system: fill the tank with a special cleaning liquid for the washer and turn on the nozzles several times.
• Mechanical cleaning: carefully clean the holes of the nozzles with a fine needle or a toothpick. Be careful not to damage the nozzle.
• Dismantling the nozzles: in difficult cases, you can remove the nozzles and wash them under running water or soak them in a special cleaner.

Clogging prevention

• Use a high-quality washer fluid.
• Regularly check the condition of the nozzles.
• Before the onset of winter, completely drain the washer fluid from the tank.

Additional tips:

• If the problem persists, it is possible that the blockage did not occur in the nozzles themselves, but in the fluid supply tubes. In this case, a deeper diagnosis is required.
• To prevent the washer fluid from freezing in winter, add special antifreeze.

By following these recommendations, you will be able to quickly and effectively eliminate the problem of clogged washer nozzles and ensure safe driving in any weather conditions.

It is important to remember: when working with nozzles, be careful not to damage them. If you are not sure of your abilities, it is better to contact a car service.