Skoda Octavia III A7 2013-2019 Rear diffuser DPT V-1 (LB/SW, gloss black)

The rear diffuser DPT V-1 for Skoda Octavia III A7 2013–2019 is not a one-piece part across the full width of the bumper, but a pair of side trims that mount underneath on the corners of the rear bumper, left and right near the wheels. Such elements are also called “fangs”, “corners”, or side splitters. They accent the lower body line and visually lower the rear of the car. The item is vehicle-specific, made by the Turkish manufacturer DPT from ABS plastic in gloss black. The LB/SW mark in the name means the model is designed for the liftback (LB) and wagon (SW, Combi).

Which Octavia A7 it fits

• Generation and years: Skoda Octavia III A7 2013–2019. If you have 2020 or newer, that is already Octavia A8; A7 parts do not carry over to it.
• Body: liftback and wagon. If the rear glass lifts together with the trunk lid, it’s a liftback, even when the car is called a sedan in an ad or conversation.
• Bumper: in the photos the trims are shown on an Octavia RS. The rear bumpers of the RS and the standard version differ in shape, so before ordering compare the lower part of your bumper with the photos or send a photo to the manager — they will confirm fitment.
• Exhaust and sensors: the trims mount on the bumper corners, not in the center, but it’s worth making sure they won’t interfere with exhaust tips, a tow hitch, or parking sensors in your specific trim.

Specifications and package contents

• Manufacturer — DPT (Turkey).
• Material — ABS plastic, finish — gloss black, no painting required.
• Product size — length 52 cm, width 8 cm, height 2.5 cm.
• Package contents — as in the photo: two side trims, left and right.
• Mounting — with glass adhesive sealant; adhesive is not included and is purchased separately.

How to install

First, test-fit the trims to the bumper without adhesive: check the fit, symmetry of both sides, and gaps. Then clean, dry, and degrease the mounting area, apply the adhesive sealant and fix the part in place, allowing the adhesive to cure according to the adhesive manufacturer’s instructions. A bonded mount is reliable, but removal later is more difficult, so it’s better to align the position correctly the first time. The protective film from the glossy surface, if present, is removed after installation. You can install the trims at the network of certified DD Tuning service centers — the manager will suggest the nearest one.

What to pair with

DPT V-1 side diffusers look good together with other DPT parts for the A7 in the same gloss black:

• DPT V-1 spoiler for the trunk lid;
• front lip add-on: DPT V-2 for RS 2013–2017 or DPT V-2 for RS 2017–2019 — the front lip is selected separately depending on the facelift and bumper type;
• DPT side skirts (supplied for painting).

If you need a one-piece part for the central section of the bumper, consider other options: rear diffuser DPT V-2 for liftback and wagon, or versions only for liftback — DPT V-4 in gloss and DPT V-3 in matte black. For a chrome accent, there is a stainless diffuser trim for the 2013–2017 body. All parts for the rear bumper of this model are collected in the Skoda Octavia A7 rear diffusers section, and all tuning — on the Skoda Octavia III A7 2013–2019 page.

Description prepared with the help of AI based on the analysis of over 1 million phone conversations between DD Tuning managers and customers and the company’s knowledge base. We collected the questions customers ask most often and answers verified in practice.