How to replace a punctured car wheel yourself: instructions

A flat tire is a nuisance that can happen to every driver. However, you should not panic. With the help of this instruction, you will be able to replace the punctured wheel yourself and continue driving. Also, your car will become more improved if you use tuning accessories, a large assortment of which is available in our product catalog.

Do-it-yourself wheel replacement

Tools and materials:

1. Jack,
2. balloon wrench,
3. Anti-rollback stops,
4. Spare wheel,
5. Gloves,
6. Compressor or pump for inflating tires .

Stages of replacement:

1. Stop the vehicle in a safe place:
• Pull over to the side away from the flow of cars.
• Activate the emergency alarm.
• Install anti-rollback stops.
2. Get the tools and spare wheel:
• Loosen the bolts of the punctured wheel with a balloon wrench.
• Jack up the car.
• Remove the punctured wheel.
• Install the spare tire.
• Tighten the bolts with a balloon wrench.
• Lower the car with a jack.
3. Tighten the bolts:
• Tighten the bolts with a balloon wrench in a criss-cross pattern.
• Check the pressure in the spare tire.
• If necessary, inflate the wheel with a compressor or pump.
4. Take the tools:
• Take away the jack, cylinder wrench, anti-rollback stops.
• Take away the punctured wheel.

Advice

• Check tire pressure regularly.
• Monitor the condition of the spare wheel.
• Don't skimp on tools.
• Take gloves with you to avoid getting dirty.
• If you are not sure of your abilities, ask for help from specialists.

Replacing a punctured wheel is a simple task that any car owner can handle. By following these instructions, you can quickly and safely replace a flat tire and continue driving.