How to tint headlights with a film yourself?

Tinted headlights are a stylish element of tuning, but you need to approach it carefully. In many countries, the operation of a car with tinted headlights is prohibited due to the reduction of light transmission. However, if you are ready to take responsibility, we will tell you how to do the toning yourself. You can also significantly transform your car and make it unique if you use tuning accessories, a huge assortment of which is available in our product catalog.

Before you start, weigh all the pros and cons:

• Disadvantages: deterioration of light transmission of headlights, reduction of traffic safety at night and in bad weather. Penalties for non-compliance with accepted norms.
• Pros: aesthetic effect, protection of headlights from minor damage.

Necessary tool

If you still decide, you will need:

• Special film for headlights (with high light transmission, certified for auto optics);
• Office knife;
• Squeegee (a plastic tool for smoothing the film);
• Hairdryer (building, with temperature regulation);
• Soap solution (water + shampoo);
• Painter's tape.

Tinting process

1. Preparation: thoroughly wash and degrease the headlights. Protect the surrounding details with masking tape.
2. The shape of the film: attach the film to the headlight and cut out the shape with a margin of 1-2 cm around the edges.
3. Applying the film: before starting, wet the surface of the headlight with a soapy solution. Separate the protective layer of the film and carefully apply it to the headlight, smoothing out air bubbles with a squeegee.
4. Heating: for better fixation, carefully heat the film with a hair dryer at a distance of 20-30 cm, avoiding overheating.
5. Trimming: after the film lies flat, carefully trim the excess edges along the contour of the headlight with a utility knife.

Remember:

• Tinting is a process that requires accuracy and skill.
• In case of difficulties, it is better to turn to professionals.

In addition, it is recommended to use only film approved for use on headlights.