Replacing car taillights: useful tips

A car's tail lights signal other drivers about your intentions, such as braking, turning or reversing. Over time, the optics may fail, darken or crack. In this case, they must be replaced. Replacing the rear lights can be done with your own hands, saving you time and money on a trip to the car service. You can also improve your car and make it unique if you use tuning accessories, the assortment of which is available in our online store.

Choosing the right taillights

Here are some tips for choosing taillights:

• Compatibility: Make sure the lights you choose are compatible with your vehicle make, model and year.
• Type of bulbs: There are different types of bulbs such as halogen, light emitting diode (LED), etc. Choose the type that best suits your needs and budget.
• Quality: do not skimp on quality.

The process of replacing the rear lights

You will need:

• Screwdriver (flat or cross-shaped),
• Socket wrench and/or spanner,
• New rear lights.

Here are the basic steps for replacing tail lights:

1. Turn off the car ignition, disconnect the battery. This will make it possible to avoid short circuits and accidental electric shocks.
2. Open the trunk. Access to the taillights is usually through the trunk.
3. Remove the trunk lining (if necessary). In some cars, it is necessary to remove part of the trunk lining to access the taillights .
4. Locate the taillight fasteners. These are usually bolts or nuts that hold the lantern in place.
5. Disconnect the rear light electrical connector.
6. Remove the old lantern. Carefully remove the lamp from the vehicle.
7. Connect the electrical connector of the new lamp. Connect the connectors, making sure that the connection is secure.
8. Install the new lamp in place. Insert the lantern into the hole designated for it and fix it with fasteners.
9. Check the functionality of the new lamp. Turn on the side lights, brake lights, and turn signals to make sure everything is functioning properly.

Conclusion

Replacing tail lights is a relatively simple task that you can do yourself with basic knowledge and tools.