Why do car wipers squeak and how to fix it?

Squeaking car wipers is an annoying problem that not only interferes with comfort, but can also signal malfunctions. Understanding the causes and methods of elimination will help restore silent operation to the wipers and extend their service life. To improve the car and improve its functionality, we recommend using tuning accessories, a wide range of which is available in our online store.

Causes of squeaking wipers

• Wear of rubber blades. Over time, rubber wears out, loses elasticity and begins to creak.
• Dirty glass or brushes. Sand, dust or tar on the windshield creates friction.
• Improper installation. Loosely installed or unsuitable brushes can cause noise.
• Damage to the mechanism. Wear on the wiper mount or lever leads to vibration.

How to eliminate the squeak?

1. Clean the glass and brushes. Wipe the windshield and rubber blades with a damp cloth and a little detergent. Remove dirt and oil stains.
2. Check the condition of the wiper blades . If the rubber is cracked or hardened, replace the wipers with new ones that are the right size and mount.
3. Lubricate the fasteners. Use silicone grease on the mechanism's hinges to reduce friction.
4. Check the angle of inclination. Make sure the brushes are firmly against the glass. Adjust the lever if necessary.

Prevention

• Wash your windshield regularly.
• Use a good quality washer fluid.
• Replace wiper blades every 6-12 months.

Conclusion

Squeaking wipers are a solvable problem. Simple actions such as cleaning, replacing the blades, or adjusting them will help restore the silence and efficiency of the wipers. If the problem persists, contact a car repair shop.