How to remove tint from car glass with your own hands

Vehicle owners often have a question: how to remove the tint film with your own hands? However, this is not so easy to do, so many turn to a car service with this problem. In this article, we offer a step-by-step guide on how to remove tinting with your own hands without heating. To make the car look more presentable and stylish, it is recommended to use tuning , accessories of which are in our online store in a wide range.

Required tool

To work on removing tinting you will need:

• Clean rags;
• Sharp knife;
• Liquid soap;
• Solvent or acetone;
• Scraper.

Process

Important: Do not allow detergents or chemicals to get under the door trim, therefore it is recommended to cover all gaps and rubber seals before starting work.

The work must be carried out in the following sequence:

• First, you need to gently pry off the edge of the film with the tip of a knife.
• Next, we slowly begin to pull the film down, while every 5-10 cm we spray abundantly with liquid soap. We carry out this procedure until the film is completely removed.
• After that, using a scraper, remove the remnants of the glue on the glass. They are easily removed due to the applied soap solution.
• If film or glue remains on the glass, they can be removed with a solvent. To do this, apply the solvent to the glass and remove with a rag and / or scraper.
• After that, the glass is wiped dry with a clean cloth.

This completes the work on removing the tinting.