How to install side sills fiberglass?

Side sills fiberglass is quite a serious purchase to be taken lightly in the process of their installation on the car body. Unsuccessfully set kit will leave an unpleasant aftertaste and the drop of tar, which spoiled a barrel of honey. Therefore pay attention to certain moments and stages of installation to avoid errors and misunderstandings during the execution of the works.

Rapids GRP - complex element tuning

Fiberglass is widely used in the engineering and manufacture of auto accessories. It is lightweight, robust, inexpensive material, which is appreciated by ordinary drivers and professional mechanics. Along with this, it is also in many respects a capricious basis for the creation of objects hung on vehicle. Despite the precision and technical perfection of modern production equipment to achieve completely flat surfaces is not easy. In addition, certain deformations can occur during transport and storage.

On the other side of the car body itself does not constitute the perfection of geometry and the ideality of the coating. All of this requires some trimming and slight modifications during the installation process. Without special skills, tools and experience this would be quite difficult. If You do not have all of the above range of conditions, it is better to abandon the idea of self-fixing thresholds of the optical fiber, and contact the service station or auto repair shop. For those who feel the strength, desire and ability, our recommendations for the operations of installation of products.

10 secrets of successful installation kits

In the beginning of the installation of the acquired thresholds need to be fitting on the body of your car. If they're perfect for each other, so You pulled the lucky ticket and you can safely proceed to installation using standard fasteners. But it is not always their hanging will have to work hard and Refine to a usable form. And for one and for another occasion our recommendations.

1. Should not be long to keep the kits under direct sunlight, they can lose their original properties and lose visual appeal.
2. Work on the installation must be performed in a spacious room with an ambient temperature of +15 ? C and above. Otherwise, the product itself and the mounting substance lose elastic and viscous properties, which can affect their subsequent exploitation.
3. To ensure the elasticity and flexibility of the material it is best to use a heat gun (in extreme cases will fit and household).
4. Adjustment of surfaces necessary to produce a neat smooth movements, for surface treatment, use a fine the sandpaper or grinding machine.
5. For eliminating pores, cracks and bubbles it is better to apply a special putty for fiberglass.
6. Before installation is carried out painting of the product and drying at a temperature not exceeding 35 - 40 ? With, or may be deformed.
7. The best way of fixing the thresholds is the use of standard sealant, to obtain a strong connection it should be fixed within a few hours.
8. For installation it is strongly recommended not to use foam because it has the ability to absorb moisture, which is absolutely desirable for the metal casing of the machine.
9. The large repair thresholds can be implemented through fiberglass and polyester resin, followed by painting the surface.
10. Work on the labeling kits is best done with an assistant or assistants, it is more convenient and more fun.

Using these simple tips the installation of the thresholds of the optical fiber to turn into an interesting event and useful pastime. And if done in the mind, and the result should not disappoint. After all, a job well done with their hands - it is always a pleasure and an honor!