Volkswagen T4 Transporter 1990-2003 Bull Bar WT003 Plus-1 (Stainless Steel)

Kangaroo bar WT003 Plus-1 — a front stainless-steel protective bar for Volkswagen T4 Transporter 1990–2003. Manufacturer — CAN (Turkey). The bar protects the bumper from minor bumps during parking, on dirt roads and at warehouse entrances, and the van looks more put-together and tougher with it.

This kind of bar is appropriate for a T4 that works every day: delivers cargo, often parks right up against a loading dock or curb, and drives on country roads. On a touring or family T4 it emphasizes the off-road character of the body without changing the bumper itself.

What “Plus-1 with whiskers” means

WT003 is a series of front bars for the T4 with several versions. Plus-1 is the “with whiskers” version: in addition to the central hoop in front of the license plate, it has a lower tube with side extensions that run along the bottom of the bumper to its corners. Thanks to this, not only the middle of the bumper is protected, but also the corners, which most often suffer during maneuvers.

In the same series there are other versions — the базовая bar WT003 and WT003 Plus-2. All of them can be compared on the page kangaroo bars for VW T4.

Material and комплект

• Material — stainless steel with a chrome-like shine: corrosion-resistant, no painting required.
• In the комплект — kangaroo bar, mounting kit with brackets, and installation instructions.
• Manufacturing — stainless-steel bars are made to order; the exact lead time will be confirmed by the manager when placing the order.
• Packaging — 110 × 60 × 18 cm, weight about 10 kg.
• Plaque with lettering — if you want a bar with lettering, when ordering согласуйте with the manager what exact text is needed.

Installation

The kangaroo bar mounts to the factory mounting points on the body using the brackets from the комплект. The sequence of work is described in the instructions that come with the bar. Before finally tightening the fasteners, align the bar evenly relative to the bumper and license plate, and after a few hundred kilometers check the bolt tightness. If you don’t have experience with bodywork, it’s better to have the installation done by a service shop.

Compatibility: уточніть the year and front-end type

In the catalog this kangaroo bar is listed for T4 Transporter and T4 Caravelle/Multivan 1990–2003. At the same time, the T4 was produced with two front-end versions — a short straight front end and an extended one (“slanted nose”) with slanted headlights. In the photo, WT003 Plus-1 is installed on a T4 with the straight front end. The brackets are made to templates of a specific body, and on the facelift front end they may turn out to be too short. Therefore, when ordering, specify the exact year of manufacture and the front-end type — the manager will confirm that the mounts fit your vehicle exactly.

What to pair it with

• Side steps for VW T4 — step boards along the body complement the front bar and make getting into the cabin easier.
• Kangaroo bars for other vehicles — tips on how bars differ by shape and material.

The description was prepared based on an analysis of over 1 million phone conversations between DD Tuning managers and customers, as well as the company knowledge base. We collected the questions customers ask most often and answers verified in practice — this is not automatically generated text.