How to properly remove a nameplate from a car

The desire to change the appearance of the car often leads to the need to remove the factory nameplate or emblem. However, this should be done carefully so as not to damage the paint coating. We offer a step-by-step guide to this work. You can also transform your car and add originality to it if you use tuning accessories, a huge range of which is available in our online store.

It should be noted that this publication considers the option when the logo or nameplate is attached on an adhesive base, and not fastened with bolts or other fastening materials.

Preparation for removal

• Tool selection: To remove the nameplate, you will need a hair dryer or construction hair dryer, fishing line or dental floss, plastic scraper, degreaser, and polish.
• Cleaning the surface: thoroughly clean the surface around the nameplate from dirt and dust.

Removal process

• Heating the glue: Heat the nameplate with a hair dryer to soften the adhesive base.
• Using fishing line or floss: Pass the fishing line or dental floss between the nameplate and the body, gently moving it back and forth.
• Removing glue residue: Use a plastic scraper to carefully remove any remaining glue bits.
• Degreasing the surface: Clean the surface with a degreaser to remove any adhesive residue.
• Polishing: Polish the surface to remove small scratches.

Precautions

• Care: Be careful not to damage the paintwork.
• Temperature: Do not overheat the nameplate to avoid damaging the plastic.
• Scratch protection: Use soft tools to remove the adhesive.

Additional advice: to protect against scratches, you can stick masking tape on the nameplate before starting work.

Removing the nameplate requires precision and patience. Following these recommendations will help avoid damage and get the desired result.

It is important to remember: if you are not sure of your abilities, it is better to contact specialists.