Additional interior heater and its characteristics

A comfortable temperature in the cabin is an important indicator for the driver and his passengers. With its decrease, there is a sharp deterioration in the concentration of attention, a dulling of the speed of the response, it becomes necessary to drive a car in outerwear. All of the above - the comfort and safety of the trip. You can find out the range of additional heaters and prices by clicking on this link .

For heating the car, standard built-in heaters are provided. But not everyone copes with their purpose, so the designers developed an additional interior heater.

Benefits of additional interior heaters

The additional interior heater is mounted in the vehicle using a built-in analogue system. Their features are:

1. Minor dimensions. They simplify transportation, storage and operation.
2. Absolute versatility. Such systems are suitable for all types of buses and minibuses, as well as for the following types of vehicles such as: MAZ, KAMAZ, UAZ, ZIL, GAZelle, GAZ, VAZ, Sobol, Volvo, Photon, Ford, Scania, Mercedes, Hyundai, Opel, etc. Specifications allow you to install the device not only in the interior of the vehicle, but also in trucks for the transport of food or other products, where it is required to maintain positive temperatures.
3. If the compound coolant line is large, then an additional pump is mounted. It can run on a standalone battery.
4. The construction method is typical: there is a standard radiator through which the engine coolant flows and an installed electric fan that pumps a powerful air stream.

Specifications for the auxiliary interior heater

Those. The characteristics of such network heaters are as follows:

• required voltage from 12 or 24V;
• required power consumption 90 W;
• D.C;
• heat output 90 ⁰ C with engine coolant from 5.5 kW to 9 kW (depending on the type of cooler);
• rated maximum power 160W;
• heater capacity 215m3/h;
• full vibration resistance, 65-70Hz;
• overall size -262*205*115 mm;
• radiator - (consists of a copper one-piece tube and aluminum fins);
• cooler weight from 2.80 to 3.30 or more (depending on the model).

Such heating systems have a multidirectional assortment, which allows you to more specifically and accurately determine the required model.