Do-it-yourself soundproofing of the roof of the VAZ 2110

In continuation of the topic of the noise of the VAZ 2110 car, we suggest that you familiarize yourself with the step-by-step recommendation for soundproofing the roof of this model. Also, from early publications, you can find out how to make soundproofing the "dozens" trunk .

Materials and tools

To work on soundproofing the roof of a car, you will need:

• Clean rag.
• Degreaser (for example - gasoline "Kalosha").
• Roller roller.
• Industrial dryer.
• Screwdrivers.
• Cutting tool.
• Vibration isolation material (for example - Shumoff M2).
• Noise isolation.
• Noise absorber.

Disassembly

The procedure for disassembling the roof is as follows:

• First, elements such as ceiling lights, ceiling rails, etc. are unscrewed.
• Then you need to disassemble the rear rack, while unscrewing the lining screw.
• Using a screwdriver, remove the plastic clips for fastening the sheathing (they often break, so it is advisable to stock up on new ones).
• We take out three more clips in the area of \u200b\u200bthe rear roof amplifier.
• With careful movements, we are trying to peel off the ceiling lining.
• Through the opening of the trunk or the rear doors, we take out the trim.

Work

Further, the work process is carried out in the following sequence:

• We degrease the surface of the ceiling and let it dry.
• After that, vibration isolation is applied. In this case, the material is heated and carefully rolled with a roller.
• The second layer of glue Shumkov.
• It is recommended to apply a sound absorber on the stiffeners and places under the ceiling handrails. However, its thickness should not exceed 5 mm. otherwise there will be problems with the installation of the skin.
• Next, in reverse order, we mount the ceiling lining.

That's all, the Shumka roof of the VAZ 2110 is completed. You can also familiarize yourself with such work in more detail in the article: Do-it-yourself car roof soundproofing .