Do-it-yourself Lada Priora trunk soundproofing

We continue to silence the VAZ 2170. This time we offer step-by-step instructions for soundproofing the Priora trunk. You may also find useful publications such as: Do-it-yourself Lada Priora hood noise isolation and Door noise isolation .

Materials and tools

To silence the trunk of the Lada Priora, you will need the following:

• Vibration isolation (for example, Shumoff M3).
• Noise isolation (for example, Ultimate Soft 6).
• Special roller for rolling materials.
• Rags for degreasing.
• Degreaser.
• Hair dryer industrial.
• Screwdriver.
• Cutting tool (scissors, knife).

Noise isolation of the trunk

The weight of the work process is nothing complicated:

• First things first, the luggage compartment must be emptied.
• Then the factory trim is dismantled from the trunk bowl and lid.
• After that, the trunk is thoroughly cleaned and degreased, let dry.
• Before applying the material, it is recommended to cut out patterns according to the size of the surface to be treated.
• Then we heat the cut pieces from the bitumen side with a hairdryer and glue them to the surface, while rolling them with a special roller.

Note: when processing a niche for a spare wheel, it is recommended to use a water-repellent material.

• We do the same with the trunk lid.
• Shumka is applied with the second layer with the sticky side, also rolled.
• In addition, the plastic lining of the trunk can also be treated with noise, and it is recommended to tie the wiring and joints with an anti-creak.
• This completes the work on the trunk noise, all parts are mounted in reverse order in their places.

You can also learn how to make trunk soundproofing with your own hands from our earlier articles. We hope our guide will greatly facilitate your task and you will cope quickly without problems.