Do-it-yourself Lada Priora roof soundproofing

We continue the topic of noise reduction of the car, and next in line is the soundproofing of the Lada Priora roof. You can also familiarize yourself with our range of materials and find out prices in a special section at this link .

Tools and materials

In order for the soundproofing work to be as successful and effective as possible, we recommend acquiring the following tools and materials:

• Cutting tool (knife, scissors).
• Building hair dryer.
• Clean rag.
• Degreaser (gasoline or other).
• Roller roller.
• Screwdrivers.
• Vibration isolation material, for example - Shumoff M2.
• Sound absorber, for example - Ultimate Sound Absorber 5 .
• Noise isolation, for example - Ultimate Soft 6.

Work

First of all, of course, it is necessary to disassemble the ceiling of Priora. However, we will not describe this procedure in detail, since there is a lot of useful material on the Internet on this topic.

Further, the process should be performed in this order:

• To begin with, the ceiling should be cleaned of possible dust and thoroughly degreased.
• After the surface has dried, vibration isolation is applied. In this case, the material is heated with a hair dryer and rolled with a special roller.
• The sound absorber is glued in the second layer.
• Then, Shumkov should be applied to the inner surface of the ceiling sheathing.
• In addition, it will also be useful to process the plastic lining of the racks. This will prevent unwanted squeaks.
• After that, the ceiling is assembled in the reverse order.

It is worth remembering that too thick a layer of Shumka will negatively affect the assembly process, so the main thing here is "not to overdo it."

By the way, on the topic of soundproofing the roof, you can also pay attention to the article: Do-it-yourself soundproofing the roof of a car , published earlier on our website.